R&S SGT100A 矢量信号发生器

浏览量：3128

型　　号：SGT100A

名　　称：矢量信号发生器

品　　牌：罗德与施瓦茨(R&S)

分　　类：射频测试设备 > 射频信号源 > 矢量信号源

产品属性：主机

简　　述：

R&S SGT100A 是集成有基带发生器的射频矢量信号发生器。它专门设计用于生产和自动化应用。作为快速、紧凑、节省空间的解决方案，它速度极快，确保提高生产率，适应任何测试系统。

申请服务

我要购买我要融资保修/维修/计量校准等服务

简介：R&S SGT100A 矢量信号发生器

R&S ® SGT100A 是一款带有集成基带发生器的射频矢量信号发生器。它已针对生产和自动化应用进行了优化。

主要特点：R&S SGT100A 矢量信号发生器

最快的矢量信号发生器，具有典型的频率和电平切换时间。240 μs 优化生产吞吐量
最小的独立矢量信号发生器，频率高达 6 GHz，带有集成基带发生器（1 HU ½ 19"）
集成基带发生器，I/Q 调制带宽高达 240 MHz（在 RF 中），支持所有高级数字标准，包括 IEEE 802.11ac
卓越的 EVM 和 ACLR 射频性能
使用 R&S ® WinIQSIM2 ™仿真软件为 LTE 和 LTE-Advanced 等数字标准轻松生成信号
R&S ® SMW200A 在具有两个以上接收天线的 MIMO 应用中的理想增强

规格：R&S SGT100A 矢量信号发生器

Frequency
Frequency range	CW mode and I/Q mode	1 MHz to 3 GHz
	with the R&S®SGT-KB106 option CW mode and I/Q mode	1 MHz to 6 GHz
Setting time	with PCIe/Ethernet remote control	< 500 μs
Input frequency for external reference	into R&S®SGT100A	10 MHz, 13 MHz, 100 MHz, 1000 MHz
Level
Specified level range		–120 dBm to +17 dBm (PEP)(peak envelope power)
Setting time	with PCIe/Ethernet remote control, setting characteristic: auto	< 500 μs
Spectral purity
Harmonics	level ≤ 8 dBm, CW, I/Q wideband off	< –30 dBc
Nonharmonics	level > –10 dBm, offset > 10 kHz from carrier, f ≤ 1.5 GHz	< –76 dBc
Wideband noise	10 MHz carrier offset,level > 5 dBm, 1 Hz meas. bandwidth, CW	< –145 dBc
SSB phase noise	20 kHz carrier offset, 1 Hz measurement bandwidth
	f = 1 GHz	< –126 dBc, typ. –133 dBc
	f = 6 GHz	< –110 dBc, typ. –117 dBc
Pulse modulation		optional, with the R&S®SGT-K22 option
On/off ratio		> 80 dB
Minimum pulse width	using the integrated pulse generator	20 ns
I/Q modulation
I/Q modulator bandwidth (RF)	using an external analog signal 100 MHz < f ≤ 2.5 GHz, I/Q wideband 2.5 GHz < f ≤ 6 GHz, I/Q wideband	20 % of carrier frequency 1 GHz
	using the integrated baseband source with the R&S®SGT-K521 option with the R&S®SGT-K521 and R&S®SGT-K522 options, with the R&S®SGT-K521, R&S®SGT-K522 and R&S®SGT-K523 options	60 MHz 120 MHz 160 MHz 240 MHz
Waveform length	in one-sample steps	1 sample to 32 Msample
	with the R&S®SGT-K511 option	1 sample to 256 Msample
	with the R&S®SGT-K511 and R&S®GT-K512 options	1 sample to 1 Gsample
Waveform changeover time in multisegment waveform mode	50 MHz clock rate (external trigger, without clock change)	5 μs (meas.)
Sample resolution	equivalent to D/A converter	16 bit
ACLR	WCDMA 3GPP FDD, TM 1-64	> 68 dB; typ. 71 dB
EVM	IEEE 802.11ac, 160 MHz, MCS 9	typ. 0.4 %
Supported standards with R&S®WinIQSIM2™TM	with additional options	EUTRA/LTE, LTE-Advanced, 3GPP FDD incl. HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, CDMA2000®/1xEV-DO, TETRA, IEEE 802.11a/b/g/n/p/ac, IEEE 802.16, Bluetooth®, NFC, DVB-H/DVB-T, DAB/T-DMB, GPS, Galileo, GLONASS, BeiDou
Remote control		PCIe (single lane), Ethernet (TCP/IP) 10/100/1000BASET, USB 2.0
General data
Power consumption		65 W (meas.)
Dimensions	W × H × D, per unit	250 mm × 52.5 mm × 401 mm (9.84 in × 2.07 in × 15.79 in) 1 HU, ½ 19“ rack width
Weight	when fully equipped, per unit	4.0 kg (8.82 lb)
Recommended calibration interval	40 h/week operation in the full range of the specified environmental conditions	3 years